P0190 - Fuel Rail Pressure Sensor Circuit Malfunction
- Low or no fuel
- Faulty Rail Pressure (FRP) Sensor
- FRP harness is open or shorted
- FRP circuit poor electrical connection
- Faulty Fuel Pump
- Engine Light ON (or Service Engine Soon Warning Light)
- Engine will not start
The FRP sensor is located on the fuel rail, and provides a feedback signal to indicate the fuel rail pressure to the Powertrain Control Module (PCM). The PCM uses the FRP signal to command the correct injector timing and pulse width for correct fuel delivery at all speed and load conditions. The FRP sensor, along with the fuel volume regulator (part of the fuel injection pump), form a closed loop fuel pressure control system. An electrically faulted FRP sensor results in the deactivation of the fuel injection pump. Fuel pressure to injectors is then provided only by the FP module. When the fuel injection pump is de-energized and the injectors are active, the fuel rail pressure is approximately 70 kPa (10 psi) lower than FP module pressure due to the pressure drop across the fuel injection pump. Thus, if the FP module pressure is 448 kPa (65 psi), then the fuel rail pressure would be approximately 379 kPa (55 psi) if the injectors are active.
P0190 Information for specific makes
P0190 FORD Fuel Rail Pressure Sensor Circuit Malfunction
P0190 GMC Fuel Rail Pressure Sensor Circuit Malfunction
P0190 LEXUS Fail Rail Pressure Sensor Circuit
P0190 LINCOLN Fuel Rail Pressure Sensor Circuit Malfunction
P0190 MAZDA Fuel Rail Pressure Sensor Circuit Malfunction
P0190 MERCEDES-BENZ Fuel Rail Pressure Sensor Circuit Malfunction
P0190 MERCURY Fuel Rail Pressure Sensor Circuit Malfunction
P0190 VOLKSWAGEN Fuel Rail Pressure Sensor Signal Circuit Fault
Need more help?
P0190 CommentsHelp us improve itimaster.ru. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P0190 code? Have you replaced any parts?
Any information is appreciated. Thanks