P1810 SATURN - Transmission Fluid Pressure Valve Position Switch Circuit
- Faulty Automatic Transmission Fluid Pressure (TFP) Manual Valve Position Switch
- TFP Valve Position Switch harness is open or shorted
- TFP Valve Position Switch circuit poor electrical connection
When is the code detected?
- Engine Light ON (or Service Engine Soon Warning Light)
P1810 SATURN Description
The Powertrain Control Module (PCM) supplies ignition voltage for each range signal. By grounding one or more of the circuits through various combinations of the pressure switches, the PCM detects which manual valve position you select. The PCM compares the actual voltage combination of the switches to a TFP manual valve position switch combination table stored in memory.
The TFP manual valve position switch cannot distinguish between PARK and NEUTRAL because the monitored valve body pressures are identical. With the engine OFF and the ignition switch in the RUN position, the TFP manual valve position switch indicates PARK or NEUTRAL. Disconnecting the AT inline 20-way connector removes the ground potential for the three range signals to the PCM. In this case, with the engine OFF, and the ignition switch in the RUN position, D2 will be indicated.
Need more help?
P1810 SATURN CommentsHelp us improve itimaster.ru. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P1810 Saturn code? Have you replaced any parts?
Any information is appreciated. Thanks